End stops for microducts. Suitable for direct buried installation or installation in cabinets, protective pipes, cable shafts and manholes.

End stops are partly transparent so proper installation to microduct can be seen and verified.

End stops are always equipped with safety clips. The safety clip prevents accidental disconnection.

End stop size*  Used for example with following microducts Nestor code STK** Package size
3 mm 3/2 mm, 3/2,1 mm LV2454 5218865 100 pcs
4 mm 4/2,1 mm LV2455 5218866 100 pcs
5 mm 5/2,5 mm, 5/3,5 mm LV2456 5218867 100 pcs
6 mm 6/3,5 mm LV2457 5218868 100 pcs
7 mm 7/3,5 mm, 7/4 mm LV2251 5218880 100 pcs
8 mm 8/3,5 mm, 8/4 mm, 8/6 mm LV2458 5218869 100 pcs
10 mm 10/5,5 mm, 10/6 mm, 10/8 mm LV2459 5218870 100 pcs
12 mm 12/8 mm, 12/10 mm LV2260 5218879 100 pcs
14 mm 14/10 mm, 14/12 mm LV2261 5218878 100 pcs
16 mm 16/10 mm, 16/12 mm, 16/13 mm LV2460 5218871 100 pcs
18 mm 18/12 mm, 18/14 mm LV2461 5218872 50 pcs
20 mm 20/14 mm, 20/15 mm, 20/16 mm LV2462 5218873 50 pcs
25 mm 25/20 mm, 25/21 mm LV2463 5218874 50 pcs

 

* According to microduct outer diameter. 

** Clicking on these numbers will take you to the product page on the Finnish STK service.

 

Optimus DB End Stop  
Tightness IP 68
Short term blowing pressure 25 bar
Burst pressure According to EN 50411-2-8
Installation temperature -15 °C … +40 °C
Lifetime Tested in order to simulate a 20 years lifetime