Skip to main content
Your offer cart: » Open

Joint closures

NC-400 product family includes a wide range of joint closures for trunk and access networks. They are butt joint type closures and the material is acid-proof stainless steel and the construction of the all versions is very clear and installer-friendly. They can be installed directly to ground, manhole or handhole and with separate pole brackets to the pole or to the wall. The capacity of these closures varies from 12 to 288 fibres.

Beach joint NC-400W »

Joint closure NC-400W is based on our universal joint closure NC-400 for jointing one or two underwater cables to a duct or buried cable on the shore. Features: Can be installed directly to the ground and to a cable well Provides pressure-tight...

Joint closure NC-400 »

NC-400 is a butt joint type universal closure for trunk, feeder and access networks for splicing max. 288 fibres. The closure is delivered as pre-assembled kits for 48. 96, 192 and for 288 fibres. Features: Can be installed directly to the ground,...
Nwstor Cables' NC-410 joint closure

Joint closure NC-410 »

NC-410 is a butt joint type universal closure for trunk, feeder and access networks for splicing max. 96 fibres. Features: Can be installed directly to the ground and to a manhole Provides pressure-tight protection for optical fibres and splices...
joint closure micro

Joint closure NC-410 Micro »

Joint closure NC-410 Micro has been developed from the universal joint closure NC-410 as for a branching closure to microduct networks for branching a feeder cable to several drop cables. Features: Can be installed directly to a cable well Provides...

Joint closure NC-412 »

NC-412 is a butt joint type closure for optical fibre access networks for splicing max. 12 fibres. Typically these closures are used in the countryside for branching a small feeder cable to two or even three drop cables near single-family houses...

Joint closure NC-450 24F »

NC-450 24F is a butt joint type closure for optical fibre access networks for splicing max. 24 fibres. Features: Can be installed directly to the ground, to a manhole and to the pole with a separate pole/wall bracket Provides pressure-tight...

Joint closure NC-450 24F v.2 »

NC-450 24F is a butt joint type closure for trunk, feeder and access networks for splicing max. 24 fibres Features: Can be installed directly to the ground, to a manhole and to the pole with a separate pole/wall bracket Provides pressure-tight...

Joint closure NC-450 48F »

NC-450 48F is a butt joint type closure for optical fibre access networks for splicing max. 48 fibres. Features: Can be installed directly to the ground, to a manhole and to the pole with a separate pole/wall bracket Provides pressure-tight...

Joint closure NC-450 48F v.2 »

NC-450 48F v.2 is a butt joint type closure for trunk, feeder and access networks for splicing max. 48 fibres. Features: Can be installed directly to the ground, to a manhole and to the pole with a separate pole/wall bracket Provides pressure-tight...

Pages