Skip to main content
Your offer cart: » Open

VMOHBUK-TL

Add to cart

Access network cable for aerial installation

Declaration of Performance (document number NC17008)

VMOHBUK-TL
ApplicationAccess network cable for aerial installation. Frequency range up to 10 MHz.
StandardsCable characteristics SFS 5740. Testing EN 50289-x-x, EN 50290-x-x.
Reaction to fireFca
Swipe
Nestor codeSSTL codeCable sizeDiameter mmWeight kg/kmMin. sheath thicknessLength mPacking
L10028021702610x2x0,511,5 x 23,0 mm2301,4 mm1000K12
L10029021702720x2x0,515,0 x 26,0 mm3151,4 mm1000K14
L10030021702830x2x0,516,5 x 28,0 mm3851,4 mm1000K14
L10031021702950x2x0,521,0 x 33,0 mm5201,6 mm1000K16
L100320217030100x2x0,528,0 x 41,0 mm9001,6 mm1000K20
L100330217031200x2x0,538,0 x 52,0 mm16002,0 mm500K20
L1004002170385x2x0,812,0 x 24,0 mm2601,4 mm1000K12
L10041021703910x2x0,815,0 x 26,0 mm3301,4 mm1000K14
L10042021704020x2x0,819,0 x 30,0 mm5201,6 mm1000K16
L10043021704130x2x0,822,0 x 34,0 mm7501,6 mm1000K18
L10044021704250x2x0,832,0 x 45,0 mm12001,8 mm1000K22
Swipe
Construction
ConductorAnnealed copper wire, nominal diameter 0,5/0,6/0,8 mm.
InsulationFoam-skin PE.
Pair twistingTwo insulated conductors are twisted together to form a pair.
Different insulation colours are used for pair identification; see colour code.
Basic unitTen pairs are stranded together to form a unit and coloured plastic ribbons are used for unit identification; see colour code.
Main unitFive or ten basic units are stranded to a main unit.
Numbered plastic ribbons are used for main unit identification.
StrandingUnits and main units are stranded together to form a compact cable core.
Filling compoundThe interstices of the cable core are filled with a non-toxic and dermatological safe filling compound.
WrappingThe cable core is wrapped with a plastic insulating waterblocking tape bound crosswise with two polyester yarns.
Moisture barrierAn aluminium tape coated on one side with a polymer and a ground wire tinned copper conductor 0,8 mm (?50 -pair cables two tinned copper conductors 0,8 mm).
Suspension wireThe suspension wire is made of stranded galvanised steel wires.
The nominal diameters are 7x1,20 mm, 7x1,57 mm or 7x2,12 mm.
Outer sheathThe cable sheath consists of UV resistant black PE.
Swipe